The Sportsman on the road – we look at great B40 Sportsman and one man’s CCM featuring the evolution of that free-revving 350cc single.

Words and photography by Oli Hulme
I’d never really looked twice at a BSA B40 before getting my hands on Mike’s B40 Sportsman. It was, to my prejudiced eyes, a rather dull 350 single with not a great deal going for it. I can remember seeing adverts in Exchange and Mart for ex-Army models at prices close to scrap value. And then I met the B40 Sportsman.
Enjoy more Classic Bike Guide Magazine reading every month.
Click here to subscribe & save.
On the face of it, and at first glance, it is just another mid- 60s single. It has reasonably attractive lines and a decent stance. And then on closer examination I noticed the things that make the Sportsman a little special. The forks look far more modern than you might expect. There is no headlamp nacelle and those mudguards are spiffing. So are the grab rail and the tail-light bracket. If this is what the American importers had asked to be specced up, they knew what they were doing. The one thing that might have improved the lines would have been a rev counter, but with no drive for one on the unit engine, that would have been out of the question. With a nice set of chunky tyres and wide bars, the Sportsman looked ready for action.
Mike warned me the front brake needed getting used to. “It’s adequate but not excessive,” he said, and he was right. Fortunately, I found this out before going on the open road and adjusted my riding style to use the rear brake a lot more. Then I snicked it into first, through a near Japanese-quality gearshift, gave it a mild handful and off I went.
And what a little peach of a motorcycle it turned out to be. The gears were perfectly spaced for a little country laning, and the power was ample. Vibration was minimal, and despite a previous owner disconnecting the decompressor, starting was a breeze. A basic low compression B40 didn’t need a decompressor, but the owner of a higher compression Sportsman might have expected to need such a thing, yet the removal didn’t appear to have caused any issues. As a 350cc pushrod single, it performed far better than I had expected, with not a great deal of vibration. The decent forks and passable shocks worked well together, and the basic frame showed no sign of being overwhelmed by lumps and bumps and potholes or, indeed, anything. The way the engine sent power to the back wheel made me think how lovely this would be to try out on one of the dirt tracks nearby, and the basic tyres looked and felt up to doing it too. The Sportsman felt no larger than a modern 125, or a 1980s 250cc single. It would not be intimidating for novice rider, yet big enough for the rest of us, as well as being easy to move around in close quarters when compared to an old B31 or G3 Matchless. Plenty of steering lock was provided and, due to the length of the handlebars, there was lots of fun to be had around back-roads. The Sportsman produces about 25bhp, which for such a light bike is more than adequate. This version had energy transfer ignition and a battery to keep the lights going, charged by an alternator. The battery-less ignition would have suited mild off-road pretensions of the Sportsman allowing the rider the option of stripping the BSA of lights and battery before taking to the dirt.






Under the pr
Primary chaincase was a duplex primary chain drive, with its own oil supply using an adjustable slipper tensioner. The clutch adjustment screw could be found by removing a small threaded plug. Oil from the primary chaincase was allowed to escape in very small quantities to lubricate the chain, so in regular use you would need to keep an eye on the levels.
Those: “Not excessive,” brakes, with aluminium drums using an iron liner, are 7-inch up front, and a 6-inch at the rear and had enough capacity to handle that which is asked of them, just about. Putting the twin leading shoe item from the Starfire on the front would not go amiss, though with such a light machine it might have tied the frame in knots.
Not only was the ride and handling characteristics good, the original finish on the Sportsman, with the cracked and crazed original paint on the tank a patina lovers delight showing just how thickly BSA had laid the coating on, back in 1964.
It was a real pleasure to ride a bike that I hadn’t expected would appeal to me. A standard B40 would be a grand choice for any new arrival to the world of classic British motorcycling, and a Sportsman/SS90 even more so, if you could find one. It was fast enough to be fun, simple enough to not be scary, close enough to a modern machine to be familiar, and different enough to be a good education.









The creation, life and passing of the BSA B40
BSA went into the 1960s with a modern unit 250cc single, the C15 and an old, hefty, 350 that dated back to the 1930s, the venerable B31. That old bruiser was heavy and ploddy, and while it might have suited the barely adequate urban and country roads of the 1940s and early 1950s, time was moving on at pace. A road building frenzy saw fast two and three-lane highways, dual carriageways and even motorways being created to ride on. The benefits of modern motorcycling included being able to blast past lumbering Fodens and Scammells on these new highways, but blasting and B31 were not phrases that often occurred in the same sentence. The B31, more importantly, was expensive for BSA to make.
All BSA’s British rivals were looking at making their 350s more modern, AMC were developing their unit Matchless G5 and AJS Model 8 singles, and the new 350cc Norton Navigator twin, while Triumph’s 350 twins, the 3TA and T90 were a delight.
The logical thing for BSA to do, therefore, was to leave 1950s behind and to do this they decided to expand their already successful 250cc C15 single and make it a 350.
The C15 was a purposeful and modern 250, which replaced the old C10, C11 and C12 250s. New laws had created a whole new learner market was about to change and they would need something smart for Britains youth to keep them off Italian scooters. Legend has it that they had simply taken sister company Triumph’s Tiger Cub 200, straightened the barrel up and made the engine bigger. It was, of course, not quite as simple as that.
Though the crankcases did look the same, there was little inside them that could be swapped between the two.

The C15 came with 17-inch wheels and a simple single downtube cradle frame with the rear subframe bolted on and that excellent, simple OHV unit. The lines were smooth, and the styling inspired the later 500cc and 650cc Power Egg A-series twins.
In 1961 BSA launched the B40, the 350cc upgrade. It was not simply a C15 with a bigger engine. The wheels were bigger, as were the brakes. The shock absorbers came in for some criticism as they were not adjustable, but apart from that the B40 turned out to be decent and useable motorcycle, if a little unexciting. And while the B40 spent most of its existence as a sensible modest plodder, it was full of potential.
The engine had a cylinder barrel that was made of cast iron, while the rest of the engine was aluminium. The valves were pushrod actuated, those rods running from a gear-driven camshaft mounted in the right-hand side of the crankcase. They travelled up through a tunnel cast into the cylinder barrel and up to the cylinder head. Main bearings were initially plain but quickly gave way to rollers. With all the valve gear enclosed in a single tappet cover, and external oil lines kept to a minimum, the engine was noted for staying clean and largely leak free. On the early models, as with the C15, the sparks came from a rear mounted contact breaker unit.
The B40 became a popular utility machine for public service, with police forces buying them in batches for local patrols, but the biggest governmental contracts were for the armed forces, for whom a model with a special tough frame and pannier racks was offered. These were used by military convoy outriders and despatch riders. The military used B40s into the 1980s and put in an order for several hundred bikes as late as 1971, but by that point BSA were in no position to supply them. The government also bought hundreds for use by the Auxiliary Fire Service, a volunteer fire brigade which was to be pressed into service in the event of a nuclear attack. Many of these AFS bikes survived virtually unused and they are much sought after today.
The B40 civilian customer was someone who wanted something with a little more power and which was more capable than a 250.
Although the B40 was never intended as a performance steed, the simplicity and light weight of the chassis and the willing nature of the engine made it easy to turn into a budget off-roader. The C15 had been given a power boost to create the SS80, a smart 80mph single with more chrome, better fittings and some engine tuning. The B40 quickly got the same treatment, with the creation of the SS90 in the UK, with flat bars and chromed mudguards. This was named the B40 Star Sportsman when it was introduced in North America. This was pretty much the same as the UK SS90, but with ‘Western’ handlebars. The machine had an 8.75:1 piston, a sports camshaft, larger valves and a larger carburettor. BSA claimed 90mph plus top speed, though first road tests saw riders struggle to make that target, in admittedly poor weather conditions. The first SS90 came with a black frame, forks and a headlamp nacelle, with the tank and side panelsin red or black.

In 1962 a new version of the B40 SS90 Sportsman model arrived with a 9.0:1 compression piston. The bike lost its deeply valanced chromed mudguards in favour of lighter and more modern blade type items. Some other cosmetic changes included the replacement of fork shrouds and nacelle with rubber gaiters, the headlight being mounted on brackets, and the fitting of a chromed grab rail, and this model continued through to 1965. Some of these later models were designated as “SS90 Super Star” for the US East Coast distributor BSA New Jersey but remained branded as the Sportsman for Hap Alzina, BSA’s man on the US West Coast.
Production of all these sporty 350s was limited, with around 1370 SS90 models made. Of those, around 920 were exports to the US. The SS80 had been a popular model in the UK among learners, being as fast as the basic B40, but the SS90 had less impact. Once passing your test, Riders would not want to spend good money on something only marginally faster, particularly when there were desirable 500 and 650 twins to lust after?

1965 saw a number of changes to the B$0 generally, including to the ignition arrangements, with the points moved from their housing behind the barrel to a new home on the timing chest. Here the points cam and the advance/retard mechanism were driven from the end of the camshaft, sitting behind a small, chromed cover. The clutch cable moved from the left of the engine to the right. Gearbox teeth designs changed, and there were new gear selector and kick-starter mechanisms too. All of this development coincided with signs the range was going to get even more dramatic upgrades, with the launch of a new B40 based scrambler, the Victor Grand Prix.
And then, after a relatively short shelf life, the B40 vanished from civilian catalogues in 1966. It was replaced by the massively more powerful B44 Victor with a new and heavily beefed-up version of the unit single engine, which came with a new frame and striking looks. The B40 had done its job, and had done it well.
Malcolm’s CCM

When your humble scribe was a moped riding slip of a boy in late 1970s Northamptonshire, my next-door neighbour worked for a magazine company. Every month he would drop a packet of motorcycle publications on my doorstep. In those days Bike was the biggest selling magazine. One edition contained an article about 21-year-old Malcolm Holliday and his stunning CCM-engined special, based around the cycle parts of a BSA 250SS Gold Star. Malcolm had built it in his bedroom in a block of council flats in the shadows of the Longbridge car plant. The story was so evocative that I knew right then that this was the world I wanted to be a part of. I never forgot the grainy black-and white pictures of that CCM special.
Last October, on my way out of the main hall at Stafford Show, I did a double take. Because there was Malcolm’s CCM, apparently reborn. It was Joe Holliday’s CCM. Joe is Malcolm’s son, and he has recreated his dad’s bike, right down to the 1970s airhorns. When Malcolm built his bike in 1977, he bought an unused and unregistered BSA 250SS from famous Birmingham dealership Vale-Onslow. It came with lots of bits missing and cost him £300. He spent some time getting bits stove enamelled, chromed and painted. He sold his Triumph Bonneville and bought a new CCM 550cc engine for £683 and fitted it into the frame. While the engine was a straight fit, the straight-through exhaust had to be encouraged into place with the aid of a sledgehammer. Matthew rode around on it for a while, annoying the neighbours and getting into scrapes. Joe said: “At one point he lost the bike on a night out, only realising he had been in an accident because he woke up at home his hands stuck to his bed sheets from the blood his hands with blood all over his hands. He found it three days later.” The CCM engine managed to last 1200 miles before the engine destroyed itself. Joe said: “He phoned up Alan Clews to complain.” When the CCM founder discovered he had been using it on the road, he is reported to have responded “what do you expect? It’s designed to do a lot of laps round a short circuit!” and told his dad to: “go away”. Money being short, he fitted a BSA B50 crank, but was told that it was half the strength of the CCM unit and he should sell the bike as quickly as he could. The CCM was sold to Birmingham Motorcycles who subsequently sold it four times to customers who could never start it. Joe says: “they would phone up the shop and complain and the shop would send round a young girl in a Morris van, who would start it first kick. Most of them sold it back out of embarrassment,” Nobody knows where it is now and Malcolm can’t remember the registration number.
In 2015 Joe, who had seen the original Bike magazine article, decided that he would build a bike just like his dad’s, and would ride it to his wedding planned for November the following year. Joes said: “It took time, heartache and a considerable amount of money to get the bike on the road.”
Putting the parts together included finding rare Triumph TR5T Adventurer handlebar switches, along with a Triumph T140 headlight and T120 export bars. The 32mm Amal MkII carb is the third fitted. The first was a Spanish made 30mm Amal, and the second an Amal Mk1. The frame was originally made for a 250cc Triumph Trailblazer, the 1970 BSA B44 engine has an 11:1 JE forged piston from the US, a big-valve cylinder head, and a CCM primary cover recreated by Performance Engineering Services. PES also supplied the CCM specification crankshaft and forged con rod. He had the swing arm chromed, which he now says was a: “silly idea,” as he then had to machine the chrome off to refit it and fit the needle roller bearings. There are Akront rims on the wheels, John Tickle headlight brackets, a Triumph alloy tank with a Monza fuel cap and the same kind of air horns that Malcolm fitted to the original machine; a real ‘70s touch. Even the striped electrical tape holding the electrical wiring on the frame is as Malcolm used it on the original bike. The footrests are fitted to home-made hangers and the ‘silencer’ is a BSA B44 Victor Special unit. The remote oil filter is chromed. The Special badges on the side panels are from a Mini, as on the original bike. Originally the rear suspension nuts were Mini wheel nuts, and Joe had these recreated. Getting the bike to run effectively has seen three different ignition systems tried. Points were tried at first, and then two Boyer set ups, the latest a Micropower digital unit and it now ticks over. The special has been rewired three times. Joe did the paint himself, in his back garden.
After an enormous amount of work, on the 15th August 2016, Joe married Emily, riding to the ceremony on the CCM.
Joe has built many more bikes, as has Malcolm, who in 2010 slotted a 53bhp 400cc CCM/Suzuki DRZ engine into a 9bhp 125cc Suzuki Van Van frame.
Joe and Emily have a hugely entertaining You Tube channel called The Wurks, which as well as their bikes include a great deal of useful tips and information about how to keep your bike going. Search for The Wurks on YouTube. You will not regret it, though it might take you a while to get through everything.
SPECIFICATION SS90
ENGINE: Dry sump 343cc Single OHV Compression Ratio 8.25:1 BORE and STROKE: 79 x 70 POWER: 24bhp@ 8,000 rpm CARB: 389 Amal Monobloc PRIMARY DRIVE: Chain/Wet multiplate clutch, Four-speed gearbox IGNITION: 6v Coil and points WHEELS/TYRES: Front 3.25×18 Rear 3.50×18 BRAKES: Front 7in SLS Rear 6in FUEL TANK: 3 gallon OIL CAPACITY: 4 pint/2.3 Litre SEAT HEIGHT: 32 in/787 mm Length 80in/2083mm WHEELBASE: 52in/1321mm GROUND CLEARANCE: 7in/180mm DRY WEIGHT: 295lb/130kg.
OWNERS’ CLUB
BSA Owners’ Club
SPECIALISTS
BSA Unit Singles in the USA has a huge database of information and spares
www.bsaunitsingles.com
UK Specialists
Burton Bike Bits
SRM
Draganfly




